AMD FX-8150 (8 core )

AMD FX 8150 BullDozer



The days when AMD processors ruled the performance roost are long gone, and most enthusiasts have forgotten they ever existed. But less than a decade ago, the Athlon X2 dual-core processor thoroughly spanked Intel's first crude dual-core efforts, which were simply two separate processor dies on one chip, communicating through the front-side bus, as opposed to AMD's much more advanced true dual-core CPUs. But AMD's been playing catch-up since then, and has been forced to compete on price rather than performance in desktop processors. Now Benchmark Reviews tests the high end of the new Bulldozer desktop CPU line, the multiplier-unlocked 8-core FX-8150 CPU.

It's branded the AMD FX processor and it's only available in a single die configuration. Measuring 315mm2and weighing in at around 2 billion transistors (that's nearly GPU-sized), Bulldozer isn't that much smaller than existing 45nm 6-core Phenom II designs despite being built on Global Foundries' 32nm SOI process. Both die area and transistor count are up significantly over Sandy Bridge, which on Intel's 32nm HKMG process is only 995M transistors with a die size of 216mm2. This is one big chip.
The FX-8150 is the first processor we’ve seen that’s based on the Bulldozer CPU architecture, and it’s the daddy of the new line-up with a nominal frequency of 3.6GHz (boosting up to 4.2GHz).
A Module isn’t just made of a pair of stripped down K10 execution cores squabbling over some shared units, though, Bulldozer is a completely new design (and design philosophy) from AMD
The FX-8150, 8120, 6100 and 4100 are what's launching today. The first digit in AMD's FX model numbers indicates the number of cores with the 8150 and 8120 boasting eight, while the 6100 only has six active integer cores (three Bulldozer modules). The FX-4100 features four integer cores. L2 cache scales with core count (2MB per module), while the L3 cache size remains fixed at 8MB regardless of SKU.
North Bridge and L3 cache frequency alternate between 2.0GHz and 2.2GHz depending on the part. TDPs range between 95W and 125W as well, with the FX-8120 being offered in both 125W and 95W versions.
There's only a single Bulldozer die. The 6 and 4 core versions simply feature cores disabled on the die. AMD insists this time around, core unlocking won't be possible on these harvested parts.
The huge gap in clock speed between the 8120 and 8150 are troubling. Typically we see linear frequency graduations but the fact that there's a 16% difference between these two SKUs seems to point to process problems limiting yield at higher frequencies—at least for the 8-core version.
Outside of the quad-core and hex-core Bulldozer pats, the only other FX processor able to exceed the 3.3GHz clock speed of the Phenom II X6 1100T is the 8150. And if you include quad-core Phenom II parts in the mix, only two Bulldozer parts ship at a higher stock frequency than the Phenom II X4 980. Granted Turbo Core will help push frequencies even higher, but these low base frequencies are troubling. For an architecture that was designed to scale to clock speeds 30% higher than its predecessor, Bulldozer doesn't seem to be coming anywhere close.
AMD does offer six 6Gbps SATA ports on its 990FX chipset, a significant upgrade from the two 6Gbps ports on Intel's 6-series chipsets. Unbuffered ECC memory is also supported for those who desire the added security, once again a feature not supported on Intel's consumer grade 6-series chipsets.



Motherboard Compatibility
AMD is certifying its FX processors for use on Socket-AM3+ motherboards. Owners of standard AM3 motherboards may be out of luck, although motherboard manufacturers can choose to certify their boards for use with Bulldozer if they wish to do so. From AMD's perspective however, only AM3+ motherboards with BIOS/UEFI support for Bulldozer are officially supported.
All existing AM2/AM2+/AM3/AM3+ heatsinks should work with the FX processor; they simply need to be rated for the TDP of the processor you're looking to cool.
AMD's cooling system is similar to other offerings from companies like Antec and Corsair. The system is self contained, you never have to worry about adding any more liquid to it.
Attach the cooling module to your CPU socket via a simple bracket, and affix the radiator to your case and you're good to go. The radiator is cooled via two 120mm fans, also included in the box.

This is definitely a “go for it” product. It costs around Rs.13,600 and is worth every penny of it.

Moved to Accessories & Components.